• (Package of 2 Bulbs) 14SMD 3014 & 1SMD 3030 high brightness chips per bulb,Working Voltage:12v-24v.
  • Fits: T10 147 152 158 159 161 168 175 184 192 193 194 2825 2827 W5W 906 579 901 904 908 909 912 914 915 916 917 918 920 921 922 923 926 927 928 939 W16W T15 etc.Easy installation, plug and play.
  • Application: Side Marker Lights,License plate Lights, Side Door Courtesy Lights,Interior Map Lights, Dome Lights,Parking Lights,City Lights,reading light,Cargo Lights, Corner Lights, Trunk lights,Malibu Landscape Lights etc.
  • Advantage: Non-polarity design,300% brighter than original halogen bulb, aircraft grade aluminum heat sink with Low temperature,built in Constant Current IC for Longer life span & Wide Voltage & Low Power Consumption.
  • Buy with confidence, any other problem please feel free to contact us, we are always here to satisfy of you.

Very bright, tight fit in socket, but about ⅛" too long to fit in the front side markers of the Chevy/GMC pickup/Suburban. Also found that once ALL the bulbs in the turn signal circuit have been replaced with LEDs, the 'burnt out bulb' indication (steady/constant on turn signal indicator when headlights are on) goes away, & back to normal (but will still have 'hyper flash' until a LED compatible flasher has been installed). To use until a compatible bulb is found for my marker light housing, I used duct tape to tape them in place. If your housing can use bulbs that are 11/16" long past the base,these bulbs are outstanding, & I highly recommend them, but if you need the dimensions of the 194 bulbs (as I did In my '99 Suburban), then these bulbs are NOT for you.

I had 6000K LEDs as city lights/DRLs that were darn bright, but I like the distinctive amber ones better – really stand out. They were tricky to install (very tight fit in the socket and housing – concerned with possible breakage, but pulled it off). The Dawn and close-up shots show the amber visible – even with headlights on. This is a worthwhile change; just be extra careful with instalation.

These are a welcome change replacing another brand that was very cheap quality and some chip leds started to flicker after a very short time. These bulbs are so much better quality I can’t believe it! The reason I got these also was the other leds it replaces were not bright at all. These are just CRAZY bright, no comparison! They are just brilliant bright red! I will update my review as I see the longevity of this bulb. These things are built like a Sherman tank.

I purchased these red projector-style LEDs to replace the dim incandescent rear driving brake lights on my daily driver (2004 Prius). As with all LEDs there is a + and - side to the plug, so if it doesn't work at first pull the bulb out and rotate it 180 degrees and reinsert. These bulbs are very bright and work perfectly in place of the red tail light driving lights on my car. Had them installed for about 6 months now without any issues. Could not be more happy with them

Pretty great lightbulb for marker lights or backup lights if you don’t own an FJ Cruiser. It’s a little dim for the FJ but that’s not the bulb’s fault. It’s almost impossible to see backward from that truck. I’d buy it again for my mirror marker lights. In fact that’s where I ended up moving them and they are very bright for that location.

Got these to convert my third brake light to led and they work great. Nice and bright and definitely helps you get seen when stopping.

I added DRLs to my car with these and they work great for that. Probably don't want to use these for normal side marker or license plate lights, they would be too bright.

Not as bright as the previous version of this item. The previous version had three rows of leds around the middle, this sadly only has one. It looks like they discontinued the previous model as well.

These work pretty well and are bright. I like them enough I bought a second package for some other stuff I have.

Arrived early and in excellent condition.very bright and easy to install.