Features:

  • Full Color Touch Screen---- It's easier to operate ,Supported operating systems windows 7 and later, Mac OS X, Linux. Monoprice Quality Assurance/Technical Assistance
  • Support For Most Filament Types---- The heated build plate and wide range of extruder temperatures allow this printer to work with a lot of filament, from basic filaments, such as PLA, to more advanced materials, such as conductive PLA, wood and metal composites, or dissolvable PVA. with this printer having a lined throat your better off sticking to PLA TPU and PETG and avoiding higher temp filaments like PC or nylon.
  • Power Failure Recovery------TRONXY XY-2 the break-resuming capacity can save real-time printing status and RESUME THE PRINTING JOB exactly at the same place WHERE IT HAS BEEN STOPPED. This add-on totally DRIVES AWAY THE HASSLE OF REPETITIVE AND TIME-TIME CONSUMING PRINTING JOBS CAUSED BY UNEXPECTED POWER OUTAGE. Totally get you out of worries about printing large-size 3D models.
  • Ready To Print----Semi-assembled design. Just 4 steps to complete the combination easily .you can easy assembled them within 20 min. The package include sample PLA filament and a 8G MicroSD card with preinstalled models, you can begin your printing once you get my product from the courier
  • After sales service------Support@tronxy.com Abby@tronxy.com Our TRONXY will provide lifetimeTechnical support,will give you a satisfactory answer. Due to the jet lag or Chinese New Year holidays ect, we may not be able to reply in time during those special periods, but we guarantee that we will respond within 24 hours under normal conditions. Please wait patiently for our reply, don't rush to give a bad review.Your support is our TRONXY biggest motivation
Great 3D printer

Ok so let’s start out with saying this is not my first 3d printer that being said it was the easiest to put together. From the time I opened the box to the start of the first print was one hour and 20 mins. Part of that was unboxing and making sure I had everything. It took about 20-30 min to put it together. Then leveling the bed wow this has to the easiest bed I have ever leveled. Then I started the first print. Of course I pick one off the micro-SD card provided with the printer and it was a 10hr print. In this print I used the power-loss and resume feature it worked great. I also used the filament out feature and it worked great. I use the filament out feature a couple of times to change colors on the print was so easy to do. I did have a problem I had to contact tech support on and they got back to me in a couple of hours, on my other printers it would have been days or weeks so this is great. Pros. Prints up to 100mm/s Touch screen32bit control board with resume on powerloss Filament out detection Heated bed All metal build Easy to get parts for if you want to modEasy to assemble Cons. Make sure the control box has proper cooling mine did not when I got they had to send me a fan to add to add to it now it is fine.

Great printer for the Money

Impressed with this printer. The Tronxy XY-2 comes 95% assembled. Just a few bolts, plug in the electronics and make sure everything it tight and it's good to go. I had a small bit of trouble getting the X carriage tight but the company was quick to respond to my pleas for help. My first print was an XYZ calibration cube and I was able to play with some extruder steps and get a very good print. My second print was a tall thin cylinder and that came out pretty perfect. I'm happy with my purchase, this is my 8th printer and it has quickly moved into the 3rd spot of favorites. I've included some photos of the unpacking and assembled printer. I may update in a few weeks as I use it more.

Takes a little fine tuning, but prints great once its dialed in

This one was easy to build and all of the wires are clearly labeled. The instructions are just one page and I recommend watching the build video. Once I got it assembled I needed to tighten the belts which is fairly easy and make a few leveling and squaring adjustments. This printer is on par with other similar brands and I am able to print just as good on this one as I am on my other 3 printers. The plastic build sheet isn't as tough as Id like it to be so I will be using a glass bed on this one. Also the scraper tool is not as good as the scraper that has been included with other 3D printers that I own. It comes with all of the tools you need to build the machine and adjust the already assembled bolts. The printer has a filament run out sensor that will automatically pause a print if you are about to run out. The pause feature is great for swapping out filaments! Leveling is also easy as the firmware has a leveling procedure to help me level 5 points on the bed. This might be a tough first printer for a new user, but some trial, adjustments, and tuning is always needed with a new machine. I'm really enjoying this one and it is up and running with great results!

Great printer for the price.

I was skeptical when i first ordered this printer being that i own a few other expensive 3d printers. Assembly was pretty straight forward, the only suggestion is a better manual to be included. Bed leveling took a few tries but got it leveled. I installed the software and sliced my own marvin to compare to the other high quality printer's i own. All i can say is wow. I was very surprised at the quality. This was a quick print, took 19 minutes. With a few firmware updates and tweaks this printer will print just like my high end ones.

3D Printer XY-2 Semi-Assembled Metal Frame Structure

Building the XY-2 was easy. Tronxy has made it easy to build and fast with all the parts come well packed and organized and easy to put together by following the instructions the printer is about 90% put together. There is a 8gb micro-sd card and card reader with the printer that has all the instructions to build the printer and the 8gb card and be use for offline printing. I like the full-color touch screen you don’t see that with other printers in the same price range and a 33bit control board and with power-loss makes this printer price right for any one with a budget and to get you started in the awesome world of 3d printing. With this printer being all metal frame it is very strong and stable. The filament run out feature is a nice add on if you plan on doing long prints. it will pause the printer if you run out of filament. It has a large print bed that will suit the average person needs. now the bed is just 12v so it take a bit to heat up. This printer comes with a 32 bit control board that uses chiTu firmware the interphase is easy to use and navigate to all the settings with having a 32 bit board you can get some good prints at higher speed. Getting the bed level was fast and easy and was one of the fastest printer I setup. Would highly recommend purchasing this printer.

Great printer for the price.

My first printer was a Delta and gosh was it a pain to assemble than get it to work. However the Tronxy is remarkably easy to assemble. There are many YouTube videos available online for people who are total newbies. For me due to my schedule it took a couple of days to get it up and running but for a beginner it should take no more than 3-6 hours. After the first print of traffic cone that got messed up due to some reason I started using tape on the build plate and that has worked out much better for me. Pros. Plenty of videos online for newbies. Few steps of assembly Touch screen - very easy and quick functioning Support email is responsive. Spare screws given. Cons. Instructions on the sheet aren't greatest for someone who's vanilla to 3D printing. I would certainly recommend this printer. Great for the price

Rock solid fast build printer

OK so let me start off by saying I now have 11 printers . I like to try different printers each time. This printer was the easiest to put together took 10 mintuse from the time I opened the box to ready to print. I like the fact all screrws are allen head. The heated bed mount is metal. There is only 2 plastic parts on the full printer is a piece that the Z limit switch hits and makes it adjustable, then the second piece is a spacer behind the X limit switch. Touch screen responds nicely. filament out detection is a very nice feature. Pro's: fast build touch screen 32 bit control boatd with resume on power loose filament out detection heated bed all metal build clean setup Con's " hotend fan duct allows air to blow on heat block (easy fix) belts needed tightening out of the box (easy fix) would love glass bed

Highly Recommend

I bought this printer back in November and have been blown away by both the printer and the customer service. The printer arrived in 2 days and was packed neatly with foam. Assembly took around 20 minutes. Then I ran into a problem, the nozzle wouldn’t heat up and kept on giving me an error screen. I contacted Tronxy and Abby helped me diagnose the problem and sent me a replacement board the next day. Installed and now prints great! Pros: -Great build quality -Easy assembly -Tools -Amazing customer service -Touch screen controls Cons: -Touch screen settings and features were confusing at first. Organized differently than standard LCD screens running marlin. 5/5 Would definitely buy again!

This printer is a sleeper

I need to let you know that I'm a newbie at this but I've done months of review on this printer. When I first got the printer I thought that the align was wrong but it was me. It only took about 30 mins to assemble. But for the wiring, if your new like me, you'll have to watch the video on where the wiring goes. You also have to switch the switch, which is on the back of the power supply, to 110 volts. But it does have 220. But once it was together, an bed was levelled, an I preheated, I was up an printing. You'll also haft to print at 60 to obtain a good quality print but this is stated in the guidelines with the printer. Once I switched the speed, which I did in the beginning, I was alright. The only bad thing I see so far is that it is a pain in the a## to get off the bed. Also, check your x an y belts to make sure that are properly moving. But overall, for the price an the quality an look of the printer, I'm very satisfied. It also comes preloaded with gcodes to instantly get you printing. An the touchscreen is very responsive. Sometimes you do have to press twice, but for the most part it does respond. An the heating process is very fast. For me to reach 200 on the bed, it only took about a min or two. This also includes the nozzle heat. The fan is low, but when you start to print it is noticeable but not to where it's beyond loud. It's still fairly quiet when printing. If you are a newbie like me an want a starter printer, you should definitely get this. An for the price, why wouldn't you.

Full Reviews