Features:

  • UNIVERSAL FIT: Adjustable tablet mount accommodates ALL your 4'' - 11'' devices, tablet PCs, iPad Air, iPad Mini,10.5 inches iPad Pro, Galaxy Tab, iPhone, Samsung Galaxy Android phone holder.
  • STRONG SUCTION: Adopting upgraded stick material on the suction cup with pressure switch, double protection for our tablet when sticking on the dashboard or windshield.
  • ADJUSTABLE VIEWING: The Telescopic Arm extends from 4.6-6.6 inches and pivots on 225° arc for a variety of optimal positions. 360° rotation for a vertical and horizontal view while driving.
  • PROTECTIVE & PORTABLE: Rubber padding & soft sponge on the clip can protect your tablet from scratch and collision. User-friendly wire holes provide perfect charging port access for smartphones and tablets while in use.
  • EASY TO INSTALL: Install the 4t-notch on the back of the holder, then pull up to fasten. When you hear the sound, it means connect successfully. Please contact us if there is any problem when installing the product.
Stays solidly in place once installed. A great deal!!

I needed a mounting solution for an 8" Samsung Galaxy Tablet in my Boat. I use the tablet for Marine navigation in the Rivers and Bays of the San Francisco area. I found this little GEM and couldn't be happier! This mount is made of a sturdy ABS plastic and has nice foam protection for the device where it contacts the tablet. It's amazingly adjustable, (The angle of the windshield on my boat is pretty steep and the area of the dashboard I mounted it was a little snug. But, you can rotate this mount and swivel it to meet pretty much any angle.) Once you have is set to you angles, the tightening lugs are sturdy and hold their position. I ran a full day on a local lake with Some pretty choppy conditions while tubing and wakeboarding as a test. The mount stayed attached to my windshield and did not become loose in any of it's various locking points. 5 Stars in my book!

Good function, good buy, a little light.

I now have 3 pad mounts, and this one has the most good features. I thought I could stick it to my windshield and swing the joints downward so my vision wouldn't be blocked. (Police in my area will ticket blocked visibility). Nope! Too much windshield blocked. So... I bought a couple of other mounts, and they were OK but had faults. I ended up using this mount with an aluminum plate held on my dash with a thin, non-skid sheet of rubber weighted and balanced with a lead shot bag. Works wonderfully! I can swing the pad down in front of my infotainment screen. The main arm was a little weak and shaky, so I placed 2 carbon fiber strips in the grooves on each side and poured them full of epoxy. Now it's very rigid. My 10.1" Samsung pad clamps very securely, and has little vibration. You can get inexpensive sticky plates and avoid making your own. I recommend this mount, if you know exactly what you need!

LOVE IT - 10" Samsung tablet works perfect!

I honestly can't believe how nice this mount is for the money. The lever suction cup is CRAZY STRONG and actually a little tough to get off your windshield once you secure it. It took me a few tries to find exactly where I wanted to mount my 10" tablet to my windshield, but once I did it holds it like a champ. Windex the area where you want to secure it, suction cup it on, adjust it to just about any position you want (rotate it, swivel it etc.) and then lock it down. I couldn't be happier. It will be great for our upcoming road trip. PRODUCT NOTE: This mount holds my tablet VERY securely when I am driving down the road with very little wobble. It only wobbles a bit when you are typing on it.

Made my job easier, love it!

I bought this Tablet Holder to hold a Surface Tablet on an Ambulance. If you've ever been in the back of one, you know it's not the most smoothest ride you'll ever take. Honestly, I figured for the price it would not last past the first couple of hours before I chunked it in the trash. Well, not only has it lasted but, it has taken a heck of a beating and NOT failed from day one. I remain very impressed with it. It is made out of hard plastic. It comes already put together and fits a variety of size tablets because the bottom piece moves back and forth to adjust to fit the tablet and secure it in place. However, if you firmly pull one side of the tablet, it will slide out but will not fall out on it's own. When you pull the plastic covering off the plunger, it's very sticky but, doesn't leave a sticky spot on whatever you put it on which was a big plus with me. It has 3 adjustable knobs which come in very handy for a good view. It also has cushion for the back of the tablet to rest on . Once you place it where you want it and pull the lever on the suction cup, it doesn't move. At lease mine doesn't and it's holding a Surface tablet with a hard cover on it. My Tablet Holder has gone from being stuck on all the inside walls, windshield, and even the hood of an Ambulance to relaxing in bed watching a movie on my personal tablet (bottom part can be used as a kickstand) that I had to give it 5 stars. I personally have not found anything that I don't like about this item. It is serving it's intended purpose and I will definitely be buying another one.

Very nice

Perfect tablet holder fits great on my Tab-A Samsung tablet putting the tablet holder together kinda got me cause the bracket you have to slide it Hard to the Holder or it WONT LOCK and you will get angry and will wanna return the item so slide it hard till you hear it lock. Them adjust the bracket the way you want it. Great product tho You can also LOCK the arms on your tablet or ipad so it wont fall off

The best holder for my tablet EVER!

The best holder for my tablet EVER! Once it's positioned and you insert your tablet... It's not moving without you releasing it. Which is extremely easy. I've bought a second one only because the adhesive that is used in conjunction with the suction cup melted over the summer in my work truck. Absolutely great though. Perferms as needed!

Been using it for the last six months, Works well

I uber and have went to a tablet. This has worked well to keep the tablet in place, with zero movement. It was easy to figure out how to easily remove the tablet, as well as removing the suction when I want to just drive around without it on my dashboard. You have to push down hard on the button to get it to suction and then latch it. If you don't push down, it may fall off sooner or later. I find the ability to maneuver it great into whatever viewpoint I want. Highly recommend.

strong holder

I use this in my pickup with a Samsung 8" tablet, this is very sticky and with the suction added to the base it holds very firm. Great unit, easily adjustable as I do throw my phone in the unit on occasion. I use it mostly for the Tablet as I have a Back up camera on my Camper and I continuously monitor my rear of unit like a rear view mirror. This holder is well made, I would recommend.

the best of the bunch

I had purchased 3 other dash cam mounts for both and Tab A and our Tab 3. the first two new ones for the old tab 3 didn't fit despite explicitly saying they did. the one we got for the Tab A fits but is quit flimsy. this one is MUCH more sold and secure and we will be replacing the one on the Tab A with one of these. great product. great price

Goot mount but wont work on tablet with case

Works great on tablets without a case. I would have kept it but I had to take my case off to use the mount.

Full Reviews