Features:

  • Carburetor for Toro CCR2450 CCR3650 210 221 Snowblower Powerclear
  • Carburetor for Briggs & Stratton 801396 801233 801255 084132 084232 084133 084233 084332 084333 engine models.
  • Carburetor for Briggs & Stratton Engines in Toro power clear R-TEK 2 cycle, Briggs & Stratton 38584 38538 38413 38518 Insight
  • Carburetor for Toro Power Clear R-TEK 2 cycle lawnboy Insight, Lawnboy 2 cycle Snowblowers Briggs & Stratton Engine
  • HOOAI locates within the states, we provide carefree return, and 90 days money back guarrantee! Lifetime warranty against manufacturer defect!
The extra parts alone are worth the price!

Good so far. I bought this for a Honda gx140 engine. It had all the parts needed too, and at a great price. One thing I've noticed is that I have to leave the choke partially open in order for the engine to keep running at idle. It doesn't seem to affect the performance of the engine by doing this. It's just something that I didn't have to do with the OEM carb. And it is a little tricky to find that sweet spot when closing the choke.

Great product.

I put this in my Toro snow blower. Worked perfectly. Highly recommend.

Easy install. Affordable Replacement

Just as stated, this carb worked wonderful for my Toro CCR3650 Snowblower. The old one had a little to much wear and was in need of a replacement Installation was a breeze and even someone with little or no small engine experience could get this replaced. Good quality parts and worked very first pull. This should get me a few more years on an older machine!

Worked for me!

I purchased this kit for my Toro CCR2450, as the original float was pitted out and the machine would only run for a few minutes then stall out. I popped this kit on, and it works great now! Certainly not perfect (it might be running a little rich), but it stays running and throws snow... for $20 you can't go wrong. I also added a new spark plug ( Briggs and Stratton 801254 Spark Plug) for good measure. I used the included 2 clamps to connect the fuel line to the tank, and then from the fuel line to the carb. I only push-fit the fuel line to the shut off and filter, and so far they have not leaked. It would be nice if the seller included 4 more clamps for the filter and shut off, but I think it works fine as is.

Installed very easy

Had to drill out 2 holes a little larger. Other than that, it started on second pull. much cheaper than having the carburetor serviced for $90

Thanks customer happy

Customer very happy. No gas smell in his garage. Thanks.

Fixed my Toro Snowblower in under 1 hour

This is a nice kit, and it was an easy replacement for the OEM carburetor. I found that I did not have to "drill out" the mounting holes as several have reported. The holes on the intake manifold side of the carburetor are actually slightly elongated (elliptical), and each have a small tab of metal that will become threaded as the screw is turned through it (the aluminum is soft). I suspect that this is not a design flaw as some have suggested since the holes on the other side of the carb are clearly the correct size, but rather a way for the screw to tap the hole, and have the screw retained when all the pieces are stacked up. I replaced all the gaskets with the supplied ones and had no fuel leaks whatsoever, as has been reported by some. All in all and this was a cheap and easy fix for a poorly running machine.

Great value

Works great. Bolt holes were a little tight to mount it to the engine but other than that, two pulls and your engine will run

Full Reviews