Features:

  • OPEN SOURCE: In the spirit of innovation and progress, we have decided to make our firmware and design plans available to all for extensive modding and improvements. We hope to create a large community of users who contribute to the project ultimately resulting in a better product for all.
  • EXTRA LARGE: This printer comes with one of the largest build spaces available. At 12inx12inx15.5in, you can print models that 90% of other printers could not. The unique Bowden extruder design reduces the weight on the X-axis which delivers better performance even on very tall prints.
  • HIGH QUALITY: This all aluminum frame provides a sturdy base meant to last for years. The POM engineering thermo-plastic "V-Slot" wheels provide excellent dimensional stability even during extended use. Elimination of metal-on-metal steel rods cuts noise down dramatically.
  • GLASS BED: This printer comes stock with a reliable and flat glass bed. Forget about other printers with uneven printing surfaces and warped beds. This glass bed ensures a 100% usable and flat surface for any print from the smallest test file to the largest model. An absolute necessity when dealing with such a large build space, print from corner to corner and get perfect layer lines every time.
  • OFFICIAL CREALITY: Our experienced 3D printing engineers are available 24/7 to offer you lifetime technical support as well as our 1-Year limited manufacturers warranty. If you are not satisfied with the results of your prints, contact us and we will work with you to provide assistance until you are printing like a pro!
WOW

The printer has exceeded expectations! Printing in two hours. (I had a little trouble with the T-nuts). Been printing ever since. CR-10 community a huge help in understanding basics

Tricky to level but rest is easy

I liked that I could get this printer assembled very fast. The one bad thing or hard thing about this printer is the leveling. You have to do it by hand there’s no auto leveling. Besides that I love this printer it has a very nice print volume and quality. Maneuvering through the menus is easy and the cura software too. This all makes it fast and easy to print hope this helps:)

Great Value

This printer was easy to set up and use. There was a bit of of a learning curve but my prints are coming out better and better as I get to know the printer.

Really happy with it

Great printer! Came with no delays and easy to set up (though I had a friend with experience that helped me. But seemed VERY easy.) Comes with a full toolbox of everything you might need + a complementary roll of Filament (white). Have already printed a lot, since I’m an architecture student, and it’s great. Also, I bought it because so many other students in my school has the same one, and it’s just really good, really big, and not expensive

Great printer for cosplay and miniatures

I received mine last tuesday and put it together. Ever since then, I've been running it nonstop and I've printed a cosplay mask, several pieces of miniature terrain for my models, and at least two separate statuettes based on characters from the Muppets. I am extremely happy about the results and although I've only had it a few days, I feel like it's already paid for itself. It's easy to assemble and use. The only "hiccup" I encountered was the slicer software that came on the SD card was out of date, but CURA has the new stuff available on their website, so this was quickly resolved. Great product. 10 fo 10 would buy again.

Purely awesome!

this is my first 3d printer and I am extremely pleased with it, i model on Fusion 360 and slice with Cura and all of my models come out with fantastic detail. the build area is massive compared to a lot of printers in this price range Pros: cheap for the build area, good print quality, easy to set up had it running 30 minutes after i got it. easy to use. cons: the freestanding gantry will oscillate on fast small movements like text and faint ghosting occurs, no auto level bed recommendations if you buy this: get magigoo for the bed the tape likes to rip off with prints, go on thingiverse and print a better filament cooling duct it helps tones when bridging other notes: its not loud, its not quiet but you can easily sleep in a room with it running also helps if you put foam on the feet.

Amazing value for quality/size!

I've had several other printers in the $150-$700 range before, and it looks like I've found my new favorite. The build volume of 300x300x400 is among the biggest of any printer regardless of price, so getting it for $300-350 is an absolute bargain! The print quality is truly impressive compared to other printers I've had, and mine was also able to handle up to 70mm/s print speeds at 0.3mm layers just fine for functional parts. Only complaint is that some CR10 printers have a control board with an underspecced capacitor, which means the printer has a difficult time getting the nozzle past 225c. For me, I'm easily able to pick up a bigger capacitor and solder it on, but for those not comfortable with that, what you can do as a workaround is set your g-code to print at ~215c, then once the temp stabilizes and the print starts, adjust the nozzle temp to your desired setting. My printer came with an extra 0.4 nozzle tip which was a nice touch. Setting up / assembling the printer took about 30 minutes, super easy!

Make the leap! I shouldn't have waited this long.

After a year of research I finally bit the bullet and snagged one of these puppies. I have to be honest, I'm seriously impressed! I am absolutely new to 3d printing and was able to get going and print multiple peices over the last few days. With relative ease I might add. To be honest I thought it was going to be much harder. I will say it does take some light skill to assemble, but if you have ever built and troubleshot a PC this will be easy to assemble and the light problems you run into will be easily and quickly solvable. If you have not built and delt with PC style shenanigans than YouTube will absolutely help a ton! A few of my cable connections looked too simalar, so I used YouTube to double check my work. Sidenote just about every con or light issue with this printer can be solved by 3d printing readily available upgrade parts for free. Most of my issues with it are silly fixable things like spool location anyway. Thingiverse is your friend as well as the Cr 10 facebook group.

Amazing printer

I bought this printer to make parts for my rc car, but once i saw how amazing the printer printed i decided to test and print other things like this soap holder, and the prince symbol for my best friend. It printed so flawless He didnt believe me that it was 3d printed. I couldnt ask for a better printer then this. I contacted creality just to see how long it would take to get back to me if i ever had a problem. I was amazed when they got back to me within 24 hours. Best product and service you could ever ask for. If you are looking for a 3d printer and a company that will have your back, go with creality. This printer it comes with an sd card, the usb reader, usb cable and an extra extruder nozzle. Thank you creality for a perfect all around product.

Full Reviews