• DESIGNED FOR iPHONE - The Purity Screen Protector for iPhone 8 Plus / 7 Plus / 6S Plus / 6 Plus is an ultra-thin tempered glass screen protector designed to provide ultimate protection for your iPhone's screen.
  • TRANSPARENT - Featuring an ultra-clear, hydrophobic, and oleophobic screen coating, protecting against fingertips, sweat and oil residue. Keep your screen clear at all times!
  • SCRATCH RESISTANT - Provides everyday protection for your iPhone against scratches, bumps and minor drops.
  • EASY INSTALLATION - Installation is easier than ever! Includes an installation kit with an installation frame, wet/dry wipes, user manual, and dust removal/guide stickers.
  • WARRANTY - Provided by Purity to ensure the maximum protection for the life of your screen protector.

Ordered it early in the day and arrived the next day. Installed easily. All of the tempered glass screen protector kits have wipes to clean the phone and little pieces of alignment tape to maneuver the protector into the correct position. The Purity kit also came with a frame to more easily accomplish this alignment. After cleaning, the frame snapped easily over my iPhone 8+. Alignment was a breeze. Ran my finger down the middle of the protector and it began to adhere to the screen. I found my frame to be extremely close tolerance and the bottom left corner did not seal to the screen. I realized there was the slightest touch of interference because I didn't quite align perfectly (Talking 1/1000" here which is not really visible to the eye). Popped the frame off and the protector finished adhering on its own. there was one small air pocket and with a light rub of the surface it disappeared as advertised. I should say I've installed a lot of screen protectors all can get a small air pocket that must be pressed out. The Purity installation system performed flawlessly and was made much easier by the supplied frame. As for the protector itself, it's invisibly clear and the touch sensitivity like it isn't there. I'd buy it again if I needed to, but won't have to because there were three shields provided in the kit. My only addition to the instructions is be prepared to pop off the frame once the protector starts sticking. If you've lowered the protector into the frame properly, alignment is already perfect and it will eliminate any chance of interference.

Yay I’m so happy! Super easy installation and seems like great quality! One of my biggest frustrations with tempered glass screen protectors is how hard it is to align it perfectly to your screen. But the purity screen came with a guide that you snap onto your phone, which frames your screen perfectly. No trying to guess if your placing the screen perfectly. Just place screen in the frame and boom! Remove frame and you have Perfect allignment!

After reading all the reviews on Amazon, I decided to purchase the Purity Screen Protector for my iPhone 8 Plus. I go through screen protectors a lot and have yet to find one that applies effortlessly, user friendly and does what it is supposed to do until now. The included alignment tool makes it so you cannot put the protector on crooked. They don’t even use this when you take your phone in to have the protector installed professionally. The directions are easy to understand and the product works great. You can’t even tell there’s a screen protector on my phone. This is the only protector I’ve had that doesn’t have any air bubbles. I have dropped my phone twice on concrete (screen side down) and there’s not one dent. To top it off, 3 protectors are included. 5 stars all the way around. I highly recommend this product and will re-purchase in the future as needed.

it was time to replace my cracked screen protector once again. This was the easiest one to put on yet. I love the installation frame, it made it go on perfect the first time. This comes with everything you need to put on the screen protector. first you clean and dry your phone screen with the wipes that are included. Then use the dust removing sticky thing for anything you may have missed. Put the frame on your phone, remove the backing from the screen protector and set it in the frame. tap it and it attaches to your phone. If there are any air bubbles just push them till they reach the edges and they will disappear. Remove the frame and you have a perfectly aligned screen protector. there are 3 screen protectors in the package.

This is one of those times you get more for what you pay and after receiving my protector quickly in the mail then reading the instructions I felt like I knew exactly how to clean and apply the protector to my screen. It had simple instructions to follow, great items like a sticker sheet and wipe inside to get my screen as clean as possible before applying the protector. Once I applied I was very happy with the overall look, how the screen felt while using my phone as well as how it looked protected and made my screen look just as clear as if it had no screen at all. I would definitely purchase or recommend for any friends to use as well as myself again when I buy a new phone and need a new protector.

I bought a smaller version of this screen protector for one of my sons, and liked it enough to purchase this one for another son. I haven't had any problems with the screen protector, and it seems like it'll do the job when my son drops his phone. The holes are in the right place, and it fits the screen well. My favorite part is the installation frame though! I've historically always used the hinge method of installing glass screen protectors. That works well, but the frame is much easier! Makes it foolproof.

I've always dreaded putting on new screen protectors, they take an hour or so to get on and still always end up not quite centered (usually around the home button). I have a tremor so that always adds to the fun. These are perfect for getting the protector on straight the first time without having to mess around with it (or end up completely wasting one and having to use a new one out of a pack, I can't count how many times that's happened to me. Just clean the screen off and get any dust off, the alcohol wipe and little dry wipe are enough for that (I've had some that were useless dry wipes), put the frame on, I wipe it again in case I got fingerprints on my screen doing that, line the protector up, drop it in and smooth it out. Super easy. I'm not sitting there mad and swearing under my breath trying to line it up again and again. It's doing a good job protecting it so far. I'm pretty clumsy and my phone gets dropped a lot. I was changing out my old rims and tires for my other set yesterday and my phone fell out of my pocket a few times onto the pavement (and one of the times I dropped it, it hit the wrench to break the lug nuts to get them off from the side, I have a case with a big lip on it which probably helped with that drop) still no cracks or damage.

I break my screen protector alllll the time. I usually buy one at a time for $10 and break it barely a month later. These screen protectors come in a pack of 3 so the value is way better. I also always apply my protectors off-center but this comes with an installation frame to help you apply it perfectly! They're protective and look nice so I'm very pleased with them

I received this product as a trial to test it out and rate. My frame of reference is my beloved Maxboost, which I had just received and installed a little over a month ago. Let me first tell you, I LOVE my Maxboost. So I was a little reluctant to accept this trial offer, but am glad I did. I had no idea what to expect from this product but am very familiar with the Maxboost one (costs $7.99 for 2 screens vs. this one which costs $5.99 for 3 screens). It did take a little while longer for this one to arrive as it's not on Prime (vs. the MaxBoost one, which is one on Prime). Anyway, it was worth the wait. The packaging, the contents of the box and the product itself with its anti fingerprint, hydrophobic coated ultra this glass screen is identical in every way to my beloved Maxboost. I did (reluctantly) remove my Maxboost screen protector and put this one on. The install was flawless. Previously I had trouble getting my Maxboost on, as a dust particle had gotten stuck under the screen, and after prompt communication with Maxboost, the Maxboost one was on good with no dust particles, and it was performing just as I had expected (top-notch). That is why I really did not want to take if off, but glad I did. Because this one went on there more smoothly as the Maxboost one did - perhaps, that is because the phone's screen was clean from the Maxboost one on there already. Nevertheless, this one also came with the plastic guide to position the screen properly after cleaning the phone's screen with the wet wipe, followed by the dry wipe and finally followed by the sticker to remove dust particles. All these came with the Purity glass as they did with the Maxboost one. The difference was that when I placed the Purity glass in place, properly positioned by the plastic case it came with, unlike the Maxboost protector, this one just self-installed (adhered itself) to the phone's screen. That is great as I did not even have to touch it after it was placed (as the mfr noted in their instructions) and the screen protector is on there good. This screen protector is identical IN EVERY WAY to my beloved Maxboost. It also comes with a lifetime warranty, just as the Maxboost one does. If you're looking for a screen protector, I would recommend using this one because for $2 less, you get 1 additional screen, and it comes with everything the Maxboost one comes - including the lifetime warranty.

I only put it on my phone a few days ago, but so far I am happy with it. Not expecting it to last a lifetime, but for a few dollars, it is more than worth buying for those rare butterfinger moments when I drop my over priced phone. I’m sure all screen protectors are essentially the same, but what sold me on this set was the frame to help you line it up correctly. Although not hard, it was always the most annoying part for my perfectionist self to put it on straight and the frame made it so easy. Lined up perfectly on the first shot on my 8+.