Features:

  • 【Large Build Size】There is a large build volume for A5S 3D Printer, 305x305x320mm(12”x12”x12.6”), which enables you to print the larger and more complex models.
  • 【Simplify Installation Steps】 You would only spend up to 30 minutes installing the three components, so as to start printing.
  • 【Power Failure Protection】The printer can remain where it was oringinally running when an unexpected power outage occurs.
  • 【Filament RUN-OUT Detection】There will be a reminder of chirping when the material is used up or broken. When the material ran out and was not replenished in time, the machine will remember where the broken material stopped, then it can continue printing after material replenished.
  • 【6 Months Warranty】Lifetime technical assistance and 24 hours professional customer service.
For the price it’s awesome.

Very nice low end printer. I have not had any problems with it so far. I did learn use a glue stick and your prints will stay down nicely.

A good 3D printer

A good 3D printer since I have used it for some time.I recommend this printer and feel happy with it based on the price. Overall, it is a very good deal.There is a full range of assembling accessories for this 3D printer, which still includes PLA for testing, touch display screen, usb stick, and so on. After I first try to use, I felt that it was performed well, made of advantaged quality and usable for many different material printing.I am satisfied with its size and the printing quality. Its platform comes with pretty strong adhesion, which helps to print out the intact and undamaged objectives. Best of all is the option of pause, which enables the printer to pause and restart at any time, also during the printing process, it can make change, improve or maintain well the design for the printing.

Fantastic printer

Fantastic printer comes with advanced quality and inexpensive price, also very fast shipment and delivery. My printer was intact thanks to the strict packaging and great quality protection when it was in transit. It can be installed fast as followed an English manual, which is stable construction and simply assembly, as well other advantaged accessories and a lot of settings. There is a pretty strong adhesion in the hot bed when printer is operating.This is my first use for the 3D Printers. I found that it is a great device for a beginner to use, and it can start to use after a short-time assembly.

This is my first 3D printer

This is my first 3D printer. I assembled, leveled the bed, downloaded the sample, installed slicer and printed the first small test print in 90 minutes with zero prior experience. There are no major issues, except that I used Cura on the SD card.It is old version and some settings were wrong. Second test was sliced using JCGreat slicer from USB stick on normal PLA quality, 50% fill. Printed for 8 hours but was almost flawless except slight base warping in one place.Was afraid that piece will stick to hotbed,because some people are complaining about that and it was indeed stuck at first, but it went off just fine after the bed was cooled.

Works well

Well the first thing is that just when I took it out of the box you could tell it was a high quality printer, the pieces are quite resistant and seem quite durable.The second thing is that the printer came pre-mounted, which is great .Just have to place some pieces and you'll have it ready.Finally in terms of printing, it should be noted that its printing is quite good, as it is expected, it hardly makes noise and reaches a high speed. It has a large enough capacity to print and can print many and many hours.SuggestionIt must be adjusted carefully, especially the level of the platform, since it may not be in its correct position and it is there when it can give failures.

I noticed this 3D printer as soon as it appeared. And he exceeded my expectations on every level.

I noticed this 3D printer as soon as it appeared. And he exceeded my expectations on every level.Yes, this is not a professional 3D printer with precision accuracy. This is a qualityDesktop 3D printer with very large structural volume: 305x305x320 mm!This printer is almost "printed from the box." Assembly took about 15 minutesIt is made of high-quality components and has a hard steel case.The printer has a lightweight X-axis carriage, which is combined with a radiator.This allows you to print large parts on high speeds: up to 120-150 mm / sThe printer has a high-quality table and high-quality Ultrabase glass. PLA and PETG stickvery good. For larger parts made from ABS - you need to print “Skirt (Skirt / Brim)”.The 3D printer is equipped with a color touch screen. He is "smart and sensitive"This printer has the ability to continue printing after a “power cut”. Turn onagain and click “Yes” to the question “Continue printing”. It's nice,you can leave the printer for a long time and the quality will not suffer ...On the front panel under the protective film found several scratches. This is not critical,but unpleasant. Perhaps only I got this ...

Excellent value and performance.

I chose to buy the A5S because of its excellent value and performance. -305x305x320mm large printing volume-Diamond plated Printing Platform-Quick Assembly (unpack, arrange, refer as the manual and assemble within 20 Minutes)-Quieter than other machines. It is also performed well in preheating or the effort of stopping. Best of all, the most amazing thing is the printing performance of the A1.The printer not only comes with great quality, but also create the prints with high quality, which is also a pretty efficient operation. So beautiful!

Great service

It was very easily to set up and program. The tech support is very helpful and even has a Facebook page for questions.

Happy Customer

I have seen a lot of videos and reviews before buying a 3D printer.Now I have this printer for 5 days in continuous operation and I am very happy that I bought this printer, it is perfect.I have already printed various PLA filaments including wood.The printer result surprised me more than anything,it prints very accurately, and even small objects work perfectly. Since the heating bed is large, it takes a moment to level it. I recommend to heat the bed while perform the leveling.Changing the filament is very easy, the menu is easy to understand and works very well thanks to the touch screen.One negative thing have struck me, once the printer makes an noise as soon as the filament is empty and it sounds like something like a smoke detector.

Works perfect for beginners

It was really good near perfect but did not have the print quallity for whag i needed and yhe tape got ripped but ibreplaced it this is a perfect 3d printer for beginers i would also recomend the davinchi series though

Full Reviews