Features:

  • Excellent adhesion: Creality art carbon and silicone build surface provides the best adhesion in the market. Once the hotbed cools back to room temperature, the carbon-silicone base will release the model which can be easily removed by hand.
  • Convenient to use: The new glass plate can be placed on top of any existing hotbed surface and be held in place with simple clips. Clean with water or alcohol. Easy to remove your print by hand or with a scraper.
  • High-performance: As the hotbed heats to higher temperatures, it provides even more adhesion. Perfect for those ABS prints with difficult warping issues.
  • Reliability: The special coating is inorganic, with its hardness of 8 Mohs and heat resistance up to 400 ℃.
  • Compatibility: Compatible with Creality 3D printer Ender-3, Ender-3 Pro, Ender-3X .
Great improvement over Standard plate

This is a coated glass plate for the ENDER-3. At temperature, it has good adhesion, but at cold temperature, the 3D print releases easily. To make it work right, you need to reset the "Z" limit switch. AND re-level the bed at print temperature in all 4 corners and center. This Is a good value!

Clean with alcohol before first use

My Ender 3 came with a warped bed, about 0.2-0.3mm lower near the center. After living with it for a year I got this glass bed, and wish I’d done so sooner. Like others, I had adhesion issues at first, PLA prints wouldn’t stick even at 65°C. Then I wiped the surface with isopropyl alcohol and noticed some yellow on the paper towel. Cleaned until the yellow stuff was gone and now prints stick like superglue until the bed cools below 25°C. Once the bed reaches room temperature prints come off with zero effort and no tools.

Wow, what an upgrade!

I've been struggling with printing ABS; nothing would work. Using bed temp at 110C and Nozzle at 240C and it can't miss. I highly recommend this glass. Also use a skim of slurry or drag some scrap across a small puddle of acetone at room temp.

Huge upgrade

Still having trouble with abs but pla prints like a dream on this

Good value!

So far I've only used three different brands of PLA over the course of a week but, I've been very happy with bed adhesion from 40-60C for all of them. It cleans well with Windex and a micro fiber cloth, packaging was great, and I was very happy with the fit and finish on the plate!

Much nicer than the stock plate

Nice adhesion when warm and releases well when cool. Glass plate maintains planarity better than stock Ender 3 plexiglass plate, and puts more tension on the leveling springs, which means easier and more consistent leveling. Will buy again.

Exactly what I needed

I had the original plate that the Ender 3 came with and it worked pretty good but only in a 2x2 inch square. If you ever printed outside of that square it was warped just enough to mess up the entire print. I got the glass piece and every print has been perfect on it. If you need to upgrade your build plate this is a good way to go

Flat smooth glass

Remember to adjust your z stop switch or the print head will crash down on the glass.

Great bed with a few things they don't mention

First of all, this bed is super sticky when heated. I accidentally broke a print trying to remove it because I was too impatient to let it cool. When it does cool you can hear the "pop pop pop" of the print passively releasing from the bed. Pros: - Flat and solid - Sticky when heated - Easy to remove when cooled. Cons: - Waiting for bed to cool takes about 10 minutes on my Ender 3, which can be a bit of an annoyance when printing back to back to back for long periods. Could be solved probably by getting multiple ones, but leveling then becomes an issue. - Wiping with iso alcohol removes a yellowish residue, which I'm not sure may damage the stickiness. Stuck with using Windex and that seems to work fine.

Works great

I like that when heated up, filament sticks to plate and releases when plate cools down. No need to use scraper.

Full Reviews