Features:

  • WHY CHOOSE US: With 1/3 of the market price, you can get the same quality products here! Premium quality hardware kit are provided along with a completely turnkey experience.
  • SIMPLE AND EASY TO INSTALL: Professional instruction and customer service team help you solve all installation problems in time. Save the cost of finding a Carpenter or decoration team.
  • PACKAGE INCLUDED: A Barn Door Hardware Kit (2x 3FT Rail,5x Rail Spacers,2x Rollers,2x Door Stops,2x End Caps,1x Floor Guide,1x Hex Key;All other necessary hardware is included as you see in the pictures. For 16 inch stud.) DOOR NOT INCLUDED.
  • DOOR WEIGHT CAPACITY: 220 lb; fit door panel Width: 36"; fit door panel thickness: 1 3/8 inch and 1 3/4 inch.
  • THE BEST CHOICE FOR YOUR HOUSE: This modern twist on the classic barn door not only saves space, it allows the ability to open up multiple rooms without the annoyance of a swinging door.
Looks Great

This door hardware worked great for my project finishing a room in my basement. See photos. I did buy special hardware to keep the door in place, see second photo. The guide post that came with this was not up to it. See my other review. A couple of notes for others doing a project like this, I would raise the bar 2 and 1/2 inches above the door opening at least. There is a little gap at the top at 2 inches which I did per the instructions. Also, the bar is difficult to get 100 percent level. I came close, but when it was open it would roll over a few inches closed, annoyed me. I fixed that by opening the door, the putting a just a few small pieces of black electrical tape on the bar to keep the door from moving when open. Can't see it at all and worked great. Over all very happy with this product. Took me a few hours over a couple of Saturdays to do this. No problems.

Love it!

Our bathroom has a 24” doorway. Builders! You couldn’t spare another 6 inches?! We hated the bathroom because of this. The door swings open between the sink and toilet and we had to walk around it to get to the closet. Not nice when getting ready for work in the morning. The barn door has made our lives better and us much less crabby. The hardware is pretty and sturdy and heavy. It was a bit fiddley installing since the 16” holes don’t line up with the studs. We had to use a 1”x4” board begins it. We were able to line up one bar hole with a stud and cut the ends of the bar to fit for our 30” door. All in all, the door is very sturdy and pretty. It really makes the room.

Easy to install

I would buy again. Good quality. I didn't think about the max thickness of the door the included screws support (1 3/4). Built my own door, and it was thicker so I just went to Lowes and purchased longer bolts. No big deal. If I had to do it again, I would have had a helper to assist me in keeping the bar level. Most of the troubles I had were due to human error. The quality is great for the price. I purchased a different floor roller on Amazon, instead of cutting a groove into the bottom of the door. Didn't have the right tools to cut the groove.

Great hardware for the money

Works perfectly, I'm a cabinetmaker and build quite a bit of barn doors. This is the fourth project I used this hardware on and have had zero issues. For the price this is an excellent choice

Sturdy, easy to install - don't be fooled by the low price

This kit was perfect for adding a barn door to one of our closets. It came in a heavy narrow box just over 3ft long - so the main bar is in two sections that snap together. It is solid and sturdy - we weren't sure what to expect for the price the day we ordered it. We were pleasantly surprised. :) For our project, it was a 24" opening where we salvaged the original closet door (removed hinges) and repurposed as a barn door. We actually cut one of the 3 foot bars shorter to make it fit better in our room so we didn't have an extra foot or so of length off the end that we didn't need. We've received several comments from friends - they didn't know we cut it shorter. Be sure to install it with a header board. The kit comes with everything you need to install it except the screws/anchors/lag bolts you use to intall the header. Most big box home improvement stores sell similar kits for over $100. This was perfect for the price savings and got the job done.

Unreal quality for the price

Very, very rarely do I give a 5 star review, but this product deserves 6 stars. First off, the quality is that of any $200-$300 kit you would buy at a home improvement store. The rails are straight and sturdy and powder coated. The bearings are smooth. I have used two of these now and they work great. Installation is straightforward and simple. One thing I have noticed in other reviews is folks commenting on the door bumping as you roll it....if your door bumps you have the rail spacers backwards, the fat side goes to the wall, not the rail (see the photo).

Great product - worked prefectly.

Perfect. Installed the door this afternoon. Ran into the usual problems: the walls were neither plumb nor plane, the door opening was flush against a wall so there was no room to put a door stop on the rail, there was trim on the opening that the door ran against, studs weren't where they should have been, etc. Despite that the installation was smooth, and I could adapt the product easily. I found the instructions clear and accurate. All the hardware needed (plus lots more) was supplied, and it all fit perfectly. Good heavy metal. I'd buy it again if I ever need to hang another door.

Great quality at a fraction of the price!!!

Just got done installing this and I have to say it went up really well. This is a high quality product at a fraction of the price of a similar one at my local big box (blue) home improvement store. The materials are heavy and appear well made and all parts were present. Important things to note: 1. The rail is solid metal and comes in two sections with a strange connecting point that runs through the center mounting hole. 2. Wheels are heavy nylon and operate smoothly and quietly. 3. You HAVE to follow the directions and read the footnotes carefully. Mine stated it is highly recommend to mount the rail system to a 1x4 ledger board( not included) that has been attached to studs because while the holes are 16” apart they may not line up with your wall studs. I did this and it worked great. Also make sure to follow the measurements for the mounting height of the rail and the wheels and it gives you a nice floor and rail clearance. 4. I didn’t have any problems with the lag screws breaking as long as you drill suitable pilot holes. 5. I didn’t have any problem mounting the rail or keeping it level even though it is two pieces. I found a small nut and bolt and temporarily attached the two pieces together as I leveled and mounted it as one solid piece. My opening was smaller then 6.6 ft so I did need to cut the rail to fit. The only complaint I have, and it’s a small one, is that the set screws that’s hold the bumpers in place are too small and don’t adequately hold them in place. I will be ordering another for our next remodel project.

Full Reviews