Features:

  • 【Low Shrinkage and High Precision】ELEGOO photopolymer resin is specially designed for reducing volume shrinkage during the Photocuring process ,which ensures the high precision of the print model with smooth finish.
  • 【Fast Curing and Great Stability】ELEGOO 405nm Rapid Resin was designed to significantly reduce printing time with its excellent fluidity. Meanwhile its great stability and proper hardness guarantee a worry-free printing experience and successful printing.
  • 【Bright and Stunning Colors】: With high quality pigments and photo-initiators inside ELEGOO UV-Curing resin, the models printed with resin have a very pure and stunning color effect just like an artwork.
  • 【Wide Applications】Given the outstanding performances, ELEGOO standard resin is suitable for most DLP/LCD 3D printers. Works best with the LCD 3D Printers.
  • 【Safe and Secure Packaging】Leak-proof bottle fully wrapped with a plastic bubble bag and exquisite designed package box make sure the resin stays in place where they belong
Better than Anycubic brand!

When I orginally purchased this resin, I was a bit worried switching from official Anycubic Photon Resin. Now after using this stuff, I am completely over the moon of the quality! I honestly prefer this to the Anycubic brand. If you are on the fence about switching, take a look at the provided pictures and maybe you will change your mind. Personally, I love to save money especially when I dont have to sacrifice quality! I will definitely be a return customer and I would recommend this product to anyone.

Works Great in Wanhao D7

Works great in my Wanhao D7. I use 40 seconds base cure, then 6 seconds for each layer. I was able to successfully print down to 20 microns, and the quality is amazing. Very easy to work with, the smell is low/average.

A reluctant great review...let me explain.

This is a reluctant review because I don't want anyone to know how great this stuff is for the price. Every time I find a great resin, the price goes up astronomically. I have been consistently printing on my Anycubic Photon at settings of Layer thickness .05, Exposure of 11 seconds 1 second off time, 5 bottom layers at 95 seconds. I have had no fails through a whole bottle. I saw in one of the reviews someone mentioned it's runny...well it is. I have found in my experience that runny means easy model cleanup and less wasted resin sticking to the model and build plate. Gooey resin is a pain to clean off. I tend to rinse the completed model in hot water to get off the liquid resin then swish it in 91% or higher isopropyl alcohol. In gooey resin I tend to have to do this more than once. Not with this product. The process for clean up is rinse under hot faucet for a bit, swish in alcohol then rinse alcohol off, paper towel dry off then under the UV nail oven for a few minutes...Done. If ELEGOO reads this, feel free to send me samples in different colors to try for you. I tend to only use grey because I paint my models, but I'd be happy to try out the other colors an write some reviews. Thanks.

Very clear, fast curing.

The bottle came packaged in a tight fitting air cushion inside a double walled box. No leaks unlike some other brands i have used. Cure times are virtually the same as wanhao and anycubic fast resins. Bed adhesion has been flawless and there's been no failed prints so far. The image i posted shows the clear with some pigments added to simulate a opal. Avoid washing in IPA to prevent clouding, instead use a detergent and ultra sonic cleaner but this holds true for all resins. For the best results cure with 385nm light to prevent yellowing and paint with a spray on clear gloss for a glass like finish.

Significantly Lower Price than Other Resin, Decent Quality

The manufacturer recommends shorter curing times for this resin, but I ran the Resin XP test and found that 15 seconds with 0.05mm layers worked best. I use 15 second regular layers, 5 seconds of off time, and 10 bottom layers with 60 seconds of exposure. I’m getting consistent successful prints. Chess pieces come out with a brilliant frosted glass look. Some of my initial prints failed due to my own fault of using light supports and supports that were too long. I just bought another bottle of the clear resin. I used isopropanol to clean the models in my photos. It's possible that this would have been clear if I used Resinaway or some other product. Acetone cleaning produced the same frosted glass results. I printed a larger rook that appeared a little more yellow than the others. The model was not hollowed. I'm very happy with the smaller chess pieces. I think it’s worth the $30 I paid.

Love it!

Love the blue color. I use on a Sparkmaker and prints came out great! Planning on ordering Grey, Red, and White to give them a try as well!

Great product! Great results!

The printing results of this resin speak for itself. The Batman bust was the first print with this resin and it came out flawlesly. Ive used other resins that have been very troublesome. Some require a lot of tweaking and trial and error with the settings. This stuff worked great right out of the box with no setting adjustments. I would definitely recommend it.

Fantastic!

Wow, great stuff. Worked really well in my Creality LD-001 printer.

Great performance and repeatability. Highly recommended.

I'm using the Anycubic Photon LCD printer. The thinness of the Elegoo resin allows good flow to the print area as opposed to thicker goopy resins. If you are running low in your vat, you are assured a better chance of using every last drop. The smell is better than many resins, and the price is great. Packaging is superior as I've never had leakage. The vertical shrinkage rate has been about 4%, but may be due to the slicer(?).

I've been using nothing but Elegoo

At the price they offer this resin, and at Amazon Prime shipping, it's a no brainer. I love this stuff. Not much odor and great results, especially on the grey. Use it!

Full Reviews