Features:

  • 1kg (approximately 2.20 lbs) PLA Black + 1kg PLA White 3D Filament.(Total 2 Spools)
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm)
  • PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant
  • Recommended Extrusion/Nozzle Temperature: 190°C - 220°C (374°F - 428°F )
  • Spool Diameter: 7.8" - Spool Width: 2.5" - Spool Hub Hole Diameter: 2.20"
Nice affordable filament

Been testing this new filament, it works well at lower printing temps, 195c is a good baseline. It is very affordable and the print quality is nice. It arrives in a brown cardboard box and is vacuum sealed in a thick bag inside with desiccant. There was a small tangle at the start of the roll and is shown in the pictures, it must be caused when the person packaging the roll was locking the filament on in the keeper holes of the spool. The tangle was undone in about 2 wraps. Print at a lower temp 190c-195c, it likes to run a bit at 200c and will cause stringing. Overall the colors look good, the blue is a nice bright blue, and the grey is a nice solid grey which is great for painting. The filament is flexible when handling and was not brittle when loading. The texture of it was smooth. It is quite worth it for the price! I would try the other colors in the future.

Surprisingly great!

This is a new brand for me so I wasn't sure what to expect. I got some black filament to print out some upgrades for my printer, and I also didn't want to spend a whole lot of money on filament. I came across this and the price seemed attractive. To my surprise, this filament worked out really well. It looks a bit dull on the spool but once you print it out, it has a nice shine to it. I was curious to see how it would do on small prints so I printed out a few small models. As you can see in the picture, the quality turned out well. I took a few random measurements along the filament and saw measurements of either 1.74mm or 1.75mm. It was surprisingly consistent in diameter. I've ordered a few spools of Amazon Basics which are also well priced, but so far, I like this brand better. Granted, I have only tried out one color but the first impression has been good.

Prints smoothly...

Amazon wont allow each filament color its own review. I've tried most of the colors now and all seemed identical in traits so this one review should cover all. Because of the low cost, I didnt expect much. But I found all SuperFilla really is nice filament. It did go up in price though from $11 to $16, so its getting quite close to its bigger named competitors cost. As long as it doesn't go any higher, Ill continue buying it. Good vivid colors that look great. Prints a bit warmer at 210 C on my printers. I noticed it starts to jam up at 195 and below and becomes a bit stringy above 215 C. Your printers results may vary. I used red and blue to make part of a Captain America bust and also printed some 3D printer's parts to stand out against the black printers. The filament was shipped nicely packed in air tight bags with desicant. Was slightly pliable but not too brittle or wet. I recommend this filament as it prints smoothly without globbing or leaving defects once you figure out your pefect temp.

buy it you won’t be disappointed!

I print a lot and I mean a lot! I would love to give this a bad review to drive the price down and more stock for me but...... this is amazing filament! Holds together well prints great! My only hope with giving this an excellent review is that the price stays low! Because I will keep buying it. What I hate is when I find a great product for a great price and then they raise the price to name brand prices like hatchbox etc. buy it you won’t be disappointed (of course your setting have to be right)

Cheap and effective

Worked very well with Ender 3 pro. Calibration yielded me with even sides on my calibration cube and with no under extrusion or stringing. Filament was not within there rated accuracy of + or - .03 as over a 32 inch section my filament was 1.70. This remained steady for the 750 grams checks every 250 roughly. Make sure check your filament size as that was giving me extrusion issues as Cura wanted to see 1.75 on the default file. Avg filament width: 1.70 Layer: .2 First Layer: .15 (make sure you are level) Heat: 210c Bed: 75c (Creality glass bed used 65 for normal bed) Retraction: On Retraction speed: 3.0 Speed: 50m/s Combing:Not in skin Adhesion: skirt to prime nozzle or brim to help make them stick. These settings got my benchy to stick perfect and make a beautiful little boat. After that prints were as easy as lowering speeds for complex prints and increasing them to 50 for regular parts. Benchy was printed at 35.

Superior PLA!

I consider myself a bit of an expert on PLA as there is hardly a brand I have not tried out there. This is by far the best PLA for the price I have purchased. The price is very reasonable (hopefully it doesn't increase) and has the quality that is equally good if not better than your more expensive brands. Produces almost virtually zero stringiness, never tangles or clogs. Prints smooth as silk. I can't say enough ( and no I am not being paid to write a review) It is my go to PLA from now on.....Hopefully more colors in the future?

Amazing prints from quality filament

I tried this Superfila filament because I have had a difficult time finding a black I could print well. I found it! This filament is one of the best I've ever used. It's smooth and prints really well. I fact, my first print was perfect. I've printed this on 5 different printers and each of them produced high quality prints. I've made functional parts, and prints for display and beauty. Both turned out exceptional without problems. it's a smooth melting and very nice filament. Walls are smooth and infill goes down well. Bridging was great, overhangs are tight, thin walls and gap fill is nice also. I've been printing at 205 and am able to hit speeds well Ito the 80mm/s range without any filament issues. Additionally it sticks to all my build surfaces, glass, boraslic, PEI, and even that terrible ender 3 magnetic flex build plate. The packaging was great, with a completely vacuum sealed bag and it's wound really cleanly on the spool. the price can't be beat and even the spool itself is nice. I would defiantly recommend to anyone this filament. It's worked very well for me and I will be ordering more and trying all the colors. The quality of this can't be beat, especially for the price! Best value on Amazon

This is my default, go-to PLA filament

I burn through about a KG of this filament a week at home and at work. I've tried probably 20 different brands and this one is not only among the cheapest, but it gives some of the best prints. The temperature range is forgiving, and the flow rates can be adjusted to easily dial in the desired surface finish. It has nice rich color saturation, great interlayer adhesion + model strength, minimal shrinking/distortion (other than the amount which is normal/expected of PLA), and I don't think I've ever had a jam or a misfeed.

best pla for the money

ok so I've gone through 4 rolls of this stuff and each roll printed flawless best for the price found out it prints best at 205 for me.

Great filament for the price

I have completely printed through my first kg of Superfila white PLA, and I am very pleased. Filament came in a vacuum sealed plastic pouch. Completed 3 long >12 hour prints without any filament breaks, tangles, or nozzle clogs. Final prints color was a little warmer white than some of the other white filaments I have used, but mostly imperceptible unless right next to the other filament. Overall, I am very pleased with this purchase and wouldn't hesitate to order from them again.

Full Reviews