• Size: 3 mm / 1/8 inch ID; 5 mm / 3/16 inch OD; 10 feet length, black
  • Used to transfer liquids, air, water or solids, and it is characterized by a round, rectangular, or square shape and a hollow center
  • Working Pressure 3.4Mpa. Burst Pressure 8Mpa
  • Material Polyamide (Nylon), Thickness 1mm Bending radius 35mm
  • Constructed of high quality fuel-grade nylon for long-lasting durability against fluctuating under hood temperatures

Not much to say about a gas hose, but it is good quality hose. I called Napa and they wanted $64 for 3'. So this hose was less than half the cost for 5 feet. Leave it in the sun for about 15-20 min to soften it, and grease the end you are sliding it over. This helps considerably as the hose is strong.

This fuel line is high quality, I bought it to replace an old oil line for the outdrive assembly of my Bayliner boat whenever I was replacing all of the bellows for the transom assembly

I needed a replacement hose for a 15 gallon storage tank , the hose is rated as a vent line which means it has no pressure rating , but will work for ok gravity feed since it is impervious to alcohol and gasoline.

If came coiled up so I had to pull it straight and leave it out in the sun for a few days to straighten out. it is very stiff and to get it on the fittings I had to heat the brass fittings with a heat gun and then press the hose on. I used it to replace the fuel pick up lines on my jetski it worked perfect because it's so stiff it will stay straight down in the tank.

I actually used this as an adapter for a breather tube on my 2001 v6 mustang. I needed an adapter to fit it on my cold air intake, then i saw this and went for it. I only used 6 inches of it tho.

had a great time make a new line for the mower. does the job.

Great item. Looks durable. Installed to my Evap system.

Worked great on my fuel cell gas line. Very good quality product.