Features:

  • Perfect Design: Designed to connect and disconnect a DC12V 20A electrical circuit at will, SPST: ON-OFF control; 2 pole design (On/Off), 3rd poles with LED to be connected to earth. Fluorescent lamps will be lighted up when the switch is turned on
  • Safety Protection: This truck rocker switch control uses copper-plated silver contacts, has good electrical conductivity, and uses high-quality materials and flame-retardant casing for high safety
  • Easy Installation: Round on-off switch is easy to install, which is just direct setup, and no additional work required, our switch comes with a keyhole slot to prevent unwanted rotation
  • Widely Used: This is a Round LED rocker switch, it can work in any cars and others with a 12 Volt DC source
  • Package Includes: 12 x Round Toggle LED Switches (3 x Red LED; 3 x Blue LED; 3 x Green LED; 3 x Yellow LED SPST Switches)
Lights on switches are bright but not blinding, and they work well on a 20 amp air compressor.

Quality switches all the way! 4 Color varieties (green, orange, blue, and red) Easy to install (only 3 pins to hook up) Works correctly with rated loads of electricity, I used mine for a 20 amp air compressor. Switch is easy to turn on and isn't stiff or too loose. Lights on the switch are bright but not blinding I can't think of any negatives about these switches. I will be buying more after I use these 12. I have included a video review below for additional information.

Great value!

Great value for projects and adding accessories to your car, truck or ATV/UTV. As a rule folks, it is BETTER to have the switch controlling a relay to handle high current loads (like off road lights). If you install it this way it will last forever.

Seems to work well.

I used these in two DC powered lanterns where the original switch failed. The switches work fine although I did not have provision to connect the little LED in the switch. I am also using them at 4.5 and 6 volts at just a couple hundred milliamps and not the "intended" 12 volt and multiple amperage use in automobiles that is advertised. If I have cause to use one in a car or truck I will update (I ordered a set of 12 switches so I still have ten left). I can certainly say that for low current DC applications this is a good product at a good price (as of June 2020).

Low priced and work well.

These switches are easy to install with a 13/16" hole (use a stepped drill bit) and two or three wires. If you want to use the built in indicator light, hook up the ground (gold terminal). If you don't care about the indicator light, don't hook it up and just use it as a two pole power interrupt switch. I like the low-profile look of this switch.

Works for multiple voltage values

I bought these for an Arduino project using a 12v supply, but I can confirm the switch (including the light) work on lower voltages, all the way down to 5v, possibly lower (I'm using a linear voltage regulator to step down the 12v). I did not notice any dimming of the light when reducing the voltage. I would guess all the LEDs are probably ~3v white LEDs because there is a lens filter on top of the LED (you can tell which color is which even when it's not illuminated).

Cute little things.

These are very versatile lighted rocker round switches in a good variety of colors. Easy to install but you should know that depending on the material being mounted on, your hole bit may need to be slightly smaller or slightly bigger. For instance, plastic (and the type of plastic too differs) drills out different than wood or metal so plan accordingly. I've already mounted 7 of these on my Astro's dog house to control power to my cameras and lights. Later down the line I'll post an update on their durability and how well they handle current for audio upgrades.

Great buy

Looks great, feels sturdy, exactly what I needed to turn a halo installed in headlight on and off as needed.

Nice set of switches.

Worked really well for my add on god lamps, led bar and rear work lights plus I still have two switches to spare. Easy to install. I removed the switches, traced the holes and and the drill. If you remove the wired be very careful as they are hard to remove and I messed up one connector. Had to replace one wire terminal. Using long nose pliers and pulling from the terminal will prevent this from Happening. I installed right under the steering wheel on the fuse panel cover of my 04 Ford F-250.

These have proven to be stout, sturdy little switches.

These have proven to be stout, sturdy little switches. I use them to shut off my solar lawn lights at night when they won't be needed and turn them on in the mornings to get a supplemental charge through the day. That keeps my lights charged to the fullest extent possible with several days charge on the batteries without draining the charge every night. We lost power for a day recently and I illuminated the inside of the house for about 12 hours darkness with no significant dimming. Whatever, they are good switches that still "snap" into position and that action has not weakened. Get some.

installed one switch the rest are extras so i do have to order one every time i need one.

works great so far the wiring pattern is one of the pictures in product overview. they do not come with wiring diagram. Use of a multi-size triangle shaped drill seems to work great for hole size to install switch, just check often to ensure not make the hole to big.

Full Reviews