Features:

  • REMOVE & REINSTALL AUTOMOTIVE FAN CLUTCHES: The ABN 32mm & 36mm Fan Clutch Wrench Kit with Fan Pulley Holding Tool removes lock nuts on temperature-dependent thermo-viscous fans; The holder bar keeps the water pump pulley in place while loosening the radiator fan
  • FITS YOUR VEHICLE: Made to be compatible with BMW engine models M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S50B30, S50B32, S54; Also compatible with some Ford, GM, and Chevy models; Bar has (3) 13 mm diameter holes and (1) 24x12 mm hole plus (1) 33x11 mm and (1) 38x25 mm half-circle grooves
  • BUILT TO LAST: Constructed from 0.2-inch (5 mm) thick vanadium steel for maximum strength and longevity; 12.5-inch (31.8 cm) long clutch fan removal tool handles for less user fatigue
  • EASY TO USE: Attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, place wrench on fan clutch nut, and loosen the fan clutch nut by turning clockwise using 32 mm or 36 mm (both included) spanner to undo nut; If the hole sizes on the tool are smaller than the bolts holding the pulley wheel to the water pump, remove bolts and reinstall over bar
  • PACKAGE CONTENTS: 32mm and 36mm fan clutch removal tool set includes (2) standard size wrenches (32mm and 36mm spanner sizes) and (1) pulley bar
Improvements I made to the fan clutch tool.

The quality of the wrench set was very satisfactory. My clutch fan assembly was tight enough to require a cheater bar on the Wrench. Did not damage the ranch from the use of a cheater bar. But I did modify the tool that is used to hold the fan pulley. See a video on this Tool to see the modification. I installed drill rod pins held in with eclipse rather than use bolts for the purpose of removing the clutch assembly. I was very pleased that the rent stayed in place during removal of the fan assembly.

A must have tool for the home gamer mechanic.

If you're going to do a water pump job, you are more than likely going to have to remove the fan clutch nut attached to the water pump. This tool is a must in todays very cramped under hood environments. The tool is very thin and tough for breaking it free.

Worked great

Wouldn't fit over my 13mm heads water pump bolts but works great if used under bolts. My fan bolt was 36mm on trailblazer so glad this set comes with both wrench sizes. Saved a lot of time.

Perfect

It came fast....it was the perfect tool for the job.

Decent

I wish it had a cushion at the end of tool, I’m considering black tape around the one end only, it did the job so I’m satisfy.

Good tool set but

The tool set is well made and I guess it works great ,but it will not fit a Ford F150 inline 6.

Simple and effective

Doesn’t take up much room in my service and gets the job done.

Very sturdy set of wrenches

Worked great to remove my fan clutch on my BMW 325

came with 2 sized plus the bolt holder

worked with my W163 ML320. regular wrench is too thick to remove the fan. this worked. have used it a couple of times when i replaced the belt, then power steering pump then the water pump. looks like it will also fit my e36 Bmw 325

Fast delivery

I haven't used it yet but it's exactly what I need and I got it really fast.

Full Reviews