• Scientific Light Distribution: The 194 LED yellow bulbs are equipped with 12pcs 4014SMD and 1pcs 3030SMD Chips. 360° lighting angle for allover light emission. 300% brighter but no dazzling. Voltage: 12V DC. Power: 2W/pc. Dimension:1.14"*0.47"
  • Canbus Design & Easy Installation: Non-polarity, plug and play. No error, no flickering after installation for 95% of vehicles. Note: Although built-in CAN-bus, some vehicles especially German cars might still pop up error message(the 194 bulb still function)
  • Energy efficient & Longer lasting: Full aluminum body for better heat dissipation. Built in intelligent IC to optimize LED working temperature and prevent short circuit, extend the lifespan up to 50,000 hrs
  • Fitment: Direct LED replacement for all T10 Wedge Type - for 147, 152, 158, 159, 161, 168, 175, 184, 192, 193, 194, 195, 2825, 906, 912, W5W bulbs
  • Wide Applications: The 194 LED lights may fit 1 or 2 more positions varied from the vehicle's trim: License plate tag light, interior lights (such as map, dome room, trunk cargo area, step courtesy, glove box, reading light), side marker light, inner tail light,etc. for car, truck, boat, etc. (Please check the stock lamp or owner manual to confirm before purchasing)

Installed these in my 2010 Saab 9-3. these are brighter, whiter, and nicer than the regular bulbs. Body slightly larger than the bulb, so if the space is very tight it might not fit. Otherwise, plenty of cooling on these, and the bulb isn't polarity dependent so no need to guess which way to install these. Cherry on top is that they fade in and out nicely, and don't seem to have any "glow" when they are off.

These are some of the nicer built 194 led bulbs in regards to build and materials from the initial look. Lots of led chips all around and at the tip. The fitment is a bit tight. I had to use some force to fit them in. They are super bright. I tried them as interior bulbs but was just too bright. Ended up using them on my exterior cargo lights. They light up the truck bed pretty well. Happy with the purchase.

Installed in a 2nd Gen Tacoma. Very bright. I bought the Amber Autoone bulbs for my front marker lights and was so impressed I bought their red bulb for my interior map light. I like having one red and one white, red one is easier on the eyes at night when driving and the Wife wants to dig around the cabin for something. Construction appears very good, height clearance is nearly the same as incandescent bulbs. I’ll update if I have problems with life span, but the Ambers have been holding up for a few weeks now and they get harder use. This is probably going to be my go to bulb from here out. Picture is my map lights. The right one is a cheep white no name LED. While the picture makes the red one look dim, and yea they usually are compared to white, I assure you, it’s almost just as bright as the white in real life.

One of the door bulbs in my 2001 Tahoe finally burned out after 20 years so I decided to replace the bulbs in both doors with these LEDs. Wow, what a difference. They installed quickly and are at least 2X as bright (if not brighter) than the original equipment bulbs. The improvement was so noticeable and so significant, that I am now thinking of replacing all the old original equipment bulbs in my 20-year-old Tahoe with LEDs.

These lights are brighter than the current LED bulbs I had installed. They have fewer LED chips, but pack a punch with brightness! Easy to install, they have a tight secure fit. The construction of the bulb housing feels like metal making for a high quality premium feel. I definitely recommend these to anyone looking for brighter reverse lights! Only downfall for these is they are too tall to work for the license plate lights, but the manufacturer is producing shorter ones so I cant wait to try them out!

Very happy with the ease of install and the brightness. However, be careful. This is listed as the correct bulb for a 2016 Infiniti QX60 for both the map/courtesy lights and rear seat. It is not. Only for rear seat. So I bought 2 sets and had to send one back as it did not fit and trying it popped a fuse. But for the correct application, this is a good bulb.

These are nicely made with obvious high quality. When you plug these in your car, the plug locks in a certain orientation. Since these cylindrical LEDs emit light evenly all around, they will be okay...maybe just okay. The other type of competing product has 2 large LEDs mounted back-to-back. This type is actually much brighter when facing either LED but much dimmer when looking at the side. You have to take into account where the LEDs will point in your particular application.

Great quality replacement LED bulbs for my 2003 Toyota Echo. They fit other models & have many different applications. These LED bulbs are BRIGHTER than the incandescent stock bulbs, plus the same bulb can be installed in existing connectors & can be used in license plate marker lights, side marker lights, 3rd brake light & interior trunk light (pictured). Great customer service too if you have questions like I did with cross referencing so I got the right bulbs.

These LED bulbs are very bright and are a great replacement for my tag lights and my 3rd brake light on my truck. I have a 1998 Mazda B2500 SE. My tag is much more visible now and my 3rd brake light that is on the backside of the cab is much brighter as well. That makes me feel safer knowing that my lights are way more visible at night. I definitely recommend these high quality LED replacement bulbs.

Almost all the lights in my new Outback were LEDs, except for the cargo area dome light. That one was an anemic incandescent bulb that cast a weak yellow light. This bulb is bright white like all the other interior bulbs, provides good illumination, and was as easy as can be to install. Time will tell if it lasts.